ATEX approved KL6LM cordless mining light wireless inductive charging miner cap lamp with OLED display
LED light source: Cree XPE2
Power Source: Rechargeable Battery
Battery Type: li-ion battery
IP Rating: IP68
Certification: ATEX
Lamp Body Material: PC
Warranty (Year): 1
Lamp Power(W): 1
battery capacity: 6.6Ah
Charging time: 8H
lighting degree: 15000 lux
Feature:wirelss inductive charging
Feature: OLED display
Ex mark:I M1 Ex ia op is I Ma EN 60079-35-1
ATEX approved KL6LM cordless mining light wireless inductive charging miner cap lamp with OLED display
KL6LM cordless miner cap lamp is all-in-one designed with wireless charging technology and OLED display. The max lighting degree is 15000lux,and four lighting modes: strong light,soft light,backup light and SOS flashing. OLED display to show time,date,battery balance,lamp series number,working modes and charging status;
Wireless charging has higher efficiency,and will not have oxidated or corroded problem on charging pins; It can widely be used in mining,construction stie,emergency rescue,and other outdoor activities.
Technical Parameter of ATEX KL6LM cordless mining light wireless inductive charging miner cap lamp
|
Parameters |
Value |
Unit |
|
|
Light source |
LED Power |
1 |
W |
|
Lighting degree |
15000 |
Lux |
|
|
Life time |
100,000 |
Hours |
|
|
Li-ion battery
|
Rated capability |
6600 |
mAh |
|
Rated voltage |
3.7 |
V |
|
|
Charging time |
8-9 |
hour |
|
|
Life time |
1000 |
circle |
|
| Wireless Charger |
input voltage |
DC5 | V |
|
output voltage |
DC5 | V | |
|
output current |
1 | A | |
| Lighting time |
Hight bright |
13 | H |
|
Half bright |
26 | ||
|
Backup bright |
100 | ||
|
Lighting distance |
200 |
m |
|
|
Working temperature |
-20~45°C |
°C | |
|
Dimension |
90*73*64 |
mm | |
|
Weight (with battery) |
209 |
g |
|
|
IP Class |
IP67 |
||
|
Ex-mark |
I M1 Ex ia op is I Ma EN 60079-35-1 |
||
Picture Show of KL6LM cordless mining light wireless inductive charging miner cap lamp
Advantage of KL6LM cordless mining light wireless inductive charging miner cap lamp
●Reliability: High impact resistant, water proof and corrosion proof with matte transparent PC housing.
●Safety: High IP grade with All-in-one intrinsic safety design and compact structure; with over-charge & over-discharge protection for battery.
●Energy saving: In same brightness, the LED can save 70% energy compared with traditional light source.
●Economy: Long lifespan LED; maintenance free.
●Environmental: High Performance and green-environmental lithium battery; low self-discharge rate and no memory effect.
●Portability: Small size and light weight make it comfortable to wear.
●Uniqueness: Wireless charging technology avoids poor contact of charging which caused by the oxidation of charging port, and achieves better IP grade; with OLD display to show time, battery balance, working mode and the light's serial number;
Sturctural parts of KL6LM cordless mining light wireless inductive charging miner cap lamp
How to charge KL6LM cordless mining light wireless inductive charging miner cap lamp
● Input voltage for AC adapter is AC100-240V@50/60HZ;
● Refer below "Figure 1 "to put the lamp on the charger,and align the line on lamp to the centre line on charger
● Slide the lamp as the "close " direction to lock the lamp with charger well ,refer "Figure 2"
● After full charged,pls slide the lamp as "open"direction to take down the lamp
ATEX certificate show for KL6LM cordless mining light wireless inductive charging miner cap lamp
Application of KL6LM cordless mining light wireless inductive charging miner cap lamp
