1. Remove the dust and dirt in the explosion -proof lampshade, and improve the luminous power and heat dissipation function of the lamp.

Methods according to the lamps used to maintain the shell, clean water (lamps above the mark) or scrubbing with a wet cloth.

When the water is cleaning, the power should be blocked. It is forbidden to use a dry cloth to wipe the plastic shell (transparent) of the bulb to prevent static electricity.

2. Observe the coverage of some highlights. The phenomenon of keeping the network has not loosened, welded, and corrosion.

If this is the case, stop using and repaired it in time.

3. Turn off the light damage in time to change the notification to prevent the light source from starting and make the ballast electrical component abnormal for a long time.

4. The lamp cavity used is in a humid environment, such as water should be cleared in time, and seal parts should be replaced to ensure maintenance.

5. When turning on the lampshade, close it after opening the request card.

6. After opening, check whether the appearance of the explosion -proof joint should be intact, whether the rubber seal is sticky, whether the wire insulation is green, carbonized, whether the insulation parts and electrical components are deformed and the combustion score. If you have any questions, repairs and replace it in time.

7. The closed application front cover wet cloth quietly scrubs the lamp (not too wet) backlight and bright light to improve the lighting power of the lamp.

8. Check whether the transparent components are damaged by foreign bodies, and whether the maintenance net is loose, welding or corrosion. If so, stop using and repaired them in time. Recommended reading: The excellent place of high -quality explosion -proof polar lamp

9. If the light source is damaged, turn off the bulb in time to inform the bulb to prevent electrical components such as the flowers from abnormal for a long time because the light source cannot start.