Performance characteristics of explosion-proof lamps:

1.The light source is energy efficient and energy efficient than traditional lighting fixtures.

2.Through the unique light distribution design, precise control of the light source and light angle of the LED light source, to avoid light pollution and invalid light utilization; soft light, no glare, will not cause eye fatigue.

3.The shell is made of lightweight aluminum alloy die-casting, the surface is treated with high-pressure electrostatic spray.

4.There are special terminals inside the lamp. The user can directly enter the line during installation, without having to set up a junction box, which is quick and convenient.

5.When replacing the lamp, simply replace the end cap and replace the lamp directly. Can effectively improve work efficiency.

6.It can be selected according to different requirements of fluorescent tubes, more in line with the lighting environment.

7.The emergency device can be equipped according to specific requirements. When the external power is cut off, the lamp automatically switches the emergency lighting state.

Precautions for overhauling explosion-proof lamps:

The lamp of the explosion-proof lamp should be automatically cut off before it is turned on. When replacing the bulb, the explosion-proof joint surface of the explosion-proof lamp should be properly protected and must not be damaged; the explosion-proof surface after cleaning should be coated with phosphating paste or 204-1 anti-rust oil. It should be noted that no other paint should be painted; There shall be no rust layer on the explosion-proof surface. If there is slight rust, there shall be no numbness after cleaning. It is important that the seals used for dust and water protection are guaranteed to be in good condition. If the seal is damaged seriously, replace it with a seal of the same specification and the same material and replace the entire lamp if necessary. Pay attention to whether the lampshade is in good condition during maintenance, and if it is broken, it must be replaced immediately.