Time:2021-05-28 Views:0
LED tri-proof lights are widely used in life with their superior performance characteristics. However, as lighting fixtures, there are many common failures of LED tri-proof lamps in life. Part of the reason is due to our use methods and our daily failure to protect and maintain them. Then, how to protect the LED tri-proof lamp to extend the service life, the following Yangzhong City Hengyuan Lighting will introduce.
1. The lamp should be turned on for several hours a day. Because there is moisture in the air, it can evaporate the moisture in the patch at a certain time and extend the service life of the lamp.
2. Please check your own circuit. Will there be weak light when the lamp is installed? That is because the switch may be connected to the front of the zero line in the future, which will cause damage to the lamp for a long time.
3. Try not to switch frequently when using lamps. When the lamp is started frequently, the current passing through the (patch) is greater than the current during normal operation, which makes the temperature of the (patch) rise sharply and increase sublimation, which will greatly reduce its service life. Therefore, it is necessary to reduce the number of times the lamp is switched on and off as much as possible. .
4. Do not clean the lamp with water. Just wipe it with a dry cloth dampened with water. If you don\'t care about touching the water, try to wipe it dry as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.
5. Do not change the structure of the lamp during cleaning and protection, and do not change the parts of the lamp at will. After protection, the lamp should be installed as it is, and do not miss or wrongly install the lamp parts.