LED explosion-proof lamp thermal performance

1. Regularly remove dust and other dirt on the LED explosion-proof lamp housing to improve lighting efficiency and thermal performance. The cleaning method is based on the lamp housing support capacity, spray with water (lighting sign is overcast), or wipe with a damp cloth. Water jet cleaning, power off, use a dry soft cloth to clean the fixture and plastic enclosure is strictly prohibited (transparency) to prevent static electricity.

2. Check the transparency of foreign institutions that have no impact, and protect the network from loosening or removing welding and corrosion. If this is the case, you should stop using, repairing and replacing it in time.

3. Light damage should be turned off in time, pay attention to replace to avoid the light source and ballast can not start.

4. The Chamber shall be used in a humid environment, such as water shall be removed in time, and the lamp shall be replaced by a sealed assembly to ensure protection provided by the enclosure.

5. When you open the shade, you should warn you that the logo is needed. Turn off the power and open the back cover.