Time:2021-07-22 Views:0
Before using the high bay light, you should first install the high bay light correctly. The installation of the high bay light can be divided into the following three steps. How to install the high bay light specifically, let\'s take a look at the relevant instructions.
Whether it is used in factories, industrial and mining enterprises, petroleum, chemical, smelting and other production workshops, warehouses and other fields, or in large shopping malls, indoor stadiums and other places, they need to be installed safely, so as to ensure the safety of life and property. , The user can first determine the installation degree of the high bay light. According to the lighting environment, because the environment will change the reflection efficiency of the lamp. Generally, the degree of the lamp should be more than 5 meters, and the wire should not be close to the shell of the high bay. If the conditions are necessary, the installation time is less than 3 meters, and protective measures must be taken to prevent vehicles from touching .
Secondly, the high bay lights are wired. The main line to the luminaire is connected by flat hard copper wire, and one lamp is installed in 5 rings, and it is evenly linked on the three-phase line according to the requirements of load balance. For large-density lighting projects, the housing of the lighting lamp is separately connected with a PE protective wire.
The next step is the waterproof and low-temperature treatment of industrial and mining lamps. Generally choose high bay lights with waterproof function, choose waterproof transformer, lamp chip package is wrapped with temperature-resistant insulation material, frpp tube technology is waterproof, and can prevent low temperature damage to the lamp, even if it is used under harsh conditions, it appears Very important.