Wear-proof explosion-proof lighting storage

(1) Pay attention to the following items when storing unused explosion-proof lighting:

1. The function check should be carried out before entering the warehouse. If it can\'t work normally, it should not be put into stock. The well-checked lighting should be restored to the original packaging and placed on the board or shelf.

2. The battery should be removed when the non-rechargeable light is stored, and the function check should be performed every six months. The rechargeable lighting is charged once every six months and performs a function check;

3, the lighting should not be stressed or impacted, the charging type lighting should prevent the switch from accidentally touching and lighting;

4, storage time should not exceed two years, non-rechargeable lighting batteries should be sealed and stored, and should not exceed one year.

(2) Pay attention to the following items when using the used lighting:

1. Before putting it into stock, it must be cleaned with a soft cloth or sponge. Check the appearance of the product. If there is crack, damage and missing parts, it should be replaced and repaired. If it cannot be used normally, it should not be put into storage.

2. The non-rechargeable lighting should be removed before entering the warehouse, and the function check should be performed every six months. Charge once a quarter and perform a function check;

3, the lighting should not be stressed or impacted, the charging type lighting should prevent the switch from accidentally touching and lighting;

4. The used lighting lamps must be stored separately from the unused lighting lamps, and cannot be mixed with the lamps that are damaged or to be charged, the batteries to be replaced, and the lamps to be repaired;

5, storage time should not exceed one year.