What is the difference between factory LED tri-proof lights and explosion-proof lights

        Explosion-proof lamps are mainly integrated into one lamp after protective measures taken to prevent explosion Lamps and lanterns in the place. The three-proof lamp is mainly based on the adaptability of the lamp to the environment. The three-proof lamp refers to waterproof, explosion-proof, and anti-corrosion. It is mainly suitable for industrial lighting requirements that are corrosive, dusty, and exposed to rain. Place.

What should be paid attention to when installing LED tri-proof lights in the factory

       When installing the factory LED tri-proof lights, we must pay attention to the installation height (from the light source to the ground), the elevation angle, and the installation direction of the street lights at the same position. Of course, the longitudinal centerline of the installation of the LED street light and the longitudinal centerline of the lamp arm are also the same. Should be consistent, the horizontal horizontal line of the lamp should be parallel to the ground, and visually check whether there is any skew after tightening, and the lamp holder in the LED street lamp should be fixed firmly, the adjustable lamp holder should be adjusted to the correct position according to the design, and the lamp holder wiring should comply with the regulations. The fixing of LED street lights is also very important. We can add some nuts to these LED street lights for fixing, or add some spring pads appropriately.

Four precautions for installation of 100wLED high bay light and three performance points

100wLED high bay light is a new technology product installation requires that the installer must be a certified professional electrician. In this way, it is possible to avoid damage to the 100wLED high bay light due to installation errors. The following are the four precautions and three performance points for the installation of 100wLED high bay lights summarized by Yangzhong Hengyuan Lighting.