facebook Twitter Linke in youtube

cap lamps13316809242/15816897019
cap lamps59911926@qq.com/sales@goldenfuturehk.com
explosion proof light

News

Understand industry news

Home >  News>

How to maintain the LED explosion-proof light to have a long life?

Time:2022-03-22 Views:0

How to maintain the LED explosion-proof light to have a long life

  LED explosion-proof light is a kind of explosion-proof light, and its principle is basically the same as that of explosion-proof light. The difference is that its light source uses an LED light source, which refers to various specific measures taken to prevent the ignition of the surrounding explosive mixture. LED explosion-proof lamps are the most energy-saving explosion-proof lamps so far, which are widely used in oil fields, chemical plants, petroleum, military and other places.

  Some people will ask after purchasing LED explosion-proof lights: how to maintain LED explosion-proof lights? Today, I will talk with you about the maintenance of LED explosion-proof lights.

1. To regularly check the LED explosion-proof light, check whether the grounding fixture is grounded in the rest of the ground connection.

 

2. In order to prolong the service life of the LED explosion-proof lamp, please do not install the windshield bag in a humid environment. This time the lamp will have a great impact.

 

3. Regularly clean the LED explosion-proof lamp, and use a dry cloth to wipe the external dust to improve the light efficiency and heat dissipation performance of the lamp. Do not use a wet cloth. It is best to cut off the power before cleaning.

 

4. If there is accumulated water in the lamp cavity of the lamp used in a humid environment, maintenance should be carried out in time, and the sealing parts should be replaced to ensure the protective performance of the shell.

 

5. If the light source is damaged, turn off the light and notify the replacement in time, so as to prevent the electrical components such as ballasts from being in an abnormal state for a long time due to the failure of the light source to start.

 

6. Before closing the cover, apply a damp cloth to avoid excessive wetness and lightly wipe the light and transparent parts of the lamp to improve the light efficiency of the lamp. A thin layer of replaceable anti-rust oil should be applied to the flameproof joint surface, and attention should be paid to sealing when closing the cover. Whether the ring plays a sealing role in its original position.