The explosion-proof structure of the LED explosion-proof lamp itself is the basic of this product. When you choose, you need to test the explosion-proof structure with a simple method so that you can buy it with more peace of mind. Whether the radiator of the LED explosion-proof lamp is good also determines the performance of this product. If a product is overheated during operation, the performance and parts will be reduced.

1. First, check whether the product selection meets the requirements, check the nameplate and appearance of the product;

2. Carefully browse the application explanation book of the product, do not install it blindly;

3. The installation of the led explosion-proof lamp should ensure that it is firmly fixed, the fastening bolts should not be changed arbitrarily, and the spring washers should be available;

4. The sealing ring for dustproof and waterproof should be placed as it is when installed;

5. At the cable entry point, the cable and the sealing gasket should be carefully combined, the cross-section of the cable should be round, and there should be no concave and convex on the outside of the sheath;

6. The excess wire inlet must be blocked according to the type of explosion-proof, and the compression nut shall be tightened to seal the wire inlet;

After the installation is completed, carefully check whether the installation is stable.