Electrical components and components must comply with the requirements of relevant national regulations. They can accept the working temperature of the lamp cavity for a long time, provide electrical parameters matching with the light source, and meet various explosion-proof requirements. Explosion-proof LED lamps have specific types of explosion-proof features.

The cavity design must be designed to meet the requirements of specific explosion-proof functions and must also be easy to connect, leaving room for the appropriate radius of the drive sawtooth.

After correct wiring, the clearance and leakage interval meet the relevant regulations. The inner wall of the camera may be connected and operated properly. The inner wall of the flash metal shell must be coated with arc paint.

The electrical structure of explosion-proof LED lamp cavity mainly includes:

1. Couplings, insulation sleeves and terminals must have satisfactory mechanical resistance to prevent damage when connecting equipment.

Wiring MUST be STRONG AND durable, FREE FROM LOOSENs AND LOOSENs DUE TO vibration, heat, thermal expansion AND shortening of conductors and insulATORS.

2. Power connectors must be correctly identified. After turning, it is assumed that the cable plug protrudes from the junction box and the surrounding metal parts do not touch it.

3. The terminal must take measures to prevent them from loosening to avoid deformation of the wire at the root of the terminal. Do not press the cable directly with the screw head. This will damage the cable connector. Recommended reading: Explosion-proof LED lamp product technology needs to advance

4. Insulation sleeve should be made of data with poor hygroscopicity. For explosion-proof LED lamps with voltages higher than 127 V, do not use phenolics.

With the growth of explosion-proof LED shopping malls, companies must constantly sum up their strengths if they want to gain a foothold in the game.

The arrival of intelligence will clarify the future development trend of explosion-proof LED lights and tell enterprises that they want to make progress in product technology in the future and must innovate.