1. Synchronize the removal of dust and dirt on the explosion-proof lamp screen, improving the light output and heat dissipation function of the lamp.

According to the lamp used to maintain the housing, clean it with water (the lamp is located above the mark) or wipe it with a damp cloth.

When water jet cleaning, energy must be blocked. Do not use a dry cloth to clean the plastic (transparent) lampshade to avoid generating static electricity.

2. Please note that some highlights are affected by foreign objects, and the mesh will not loosen, detach, corrode, etc.

LED explosion-proof light

If this is the case, please stop using and repair it on time.

3. The damage to the lamp should be promptly turned off, and the notification should be changed to prevent the light source from starting, so as to keep the electrical components of the ballast in an abnormal state for a long time.

4. The lamp chamber used is in a humid environment, for example, water must be removed in a timely manner and sealing components must be replaced to ensure maintenance.

5. When opening the bulb cover, close the required card after opening it.

6. After opening, check whether the explosion-proof gasket is intact, whether the rubber sealing ring is thick, if the cable insulation is green, carbonized, whether the insulation and electrical components are deformed, and if you have any questions, please repair and replace them in a timely manner.

7. The wet cloth on the front cover of the enclosed application silently scrubs the backlight and lamp (not too wet) to improve the lighting power of the lamp.

8. Check whether transparent components are damaged by foreign objects, and whether the maintenance network is loose, detached, or corroded. If so, please stop using and make corrections on time. Recommended reading: Excellent high-quality explosion-proof electrodeless lamp

9. If the light source is damaged, the light bulb must be turned off in a timely manner to notify the replacement of the light bulb, in order to prevent electronic components (such as ballasts) from being abnormal for a long time, as the light source cannot be turned on.

When opening the explosion-proof LED lampshade, the power must be turned off according to the notification requirements before opening the cover.