In the process of installing the three-proof lamp, what are the installation methods and specific installation steps. Let's take a look at the specific content and the installation method of the three-proof lamp.

There are two ways to install the three-proof lamp: 1. Ceiling installation: According to the installation hole size of the lamp, punch the corresponding installation bolt hole on the position where the lamp needs to be installed, and then install and fix it with bolts. 2. Suspension installation: Suspension installation is mainly used in places where the temperature is very high and a wide range of lighting is required. When installing, use bolts to fix the lifting adapter plate on the lamp, and then connect the cable to the lamp. The pipe thread of the lamp and the wiring steel pipe with standard pipe thread are screwed together.

The installation steps of the three-proof lamp are as follows: determine the position of the vertical lamp, reserve (excavate) a 1.3-meter pit in the position of the vertical lamp; After the construction is completed, promptly clean up the remaining sludge on the positioning plate, and clean the impurities on the bolts with waste oil. During the solidification of the concrete, the three-proof high bay light should be watered and maintained regularly.